User`s guide

4-26 A-63054 February 2004
Application Setup
tabs
The Application Setup window provides Images, Index, and Output tabs. The
Images and Index tabs also have sub-tabs. How to use each of these tabs is
described in this chapter.
Images setup tab The Images tab provides a graphical representation of your scan structure and
is updated each time a modification is made in the Batch, Document, or Native
Scan structure sub-tabs.
You can change the default values in the Batch Name Example and
Document Number Example. When you make a new entry in these fields,
the contents in the structure are automatically updated.
NOTE: The Batch name and Document number in the Images tab do not
reflect an actual batch or document or the last batch/document used
for an application. They are used for example purposes only to show
what the Native Scan structure would look like for a given batch name
and document number.
Batch setup The Images - Batch tab allows you to define how the batch name is created
and batch size limitations.
Standard Batch Name Setup
The first time a batch is created in Capture Software, you will be prompted to
enter a new batch name. By default, Capture Software suggests BATCH001.
If the batch name entered ends with a sequential number, this number
becomes the global batch counter to be used across all applications.
Every time a batch is created for an application, Capture Software proposes
the global batch counter +1 as the sequential number portion of the new batch
name. For example, if the current batch name is CLAIMS09 (global batch
counter 09), and a new batch is created, the new batch name by default will
be named CLAIMS10.