User guide
1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 99
boot devices installed. How do we place the RBF file system on such
small embedded systems? Compact Flash devices will work in PCMCIA
systems with a carrier, so that we can use a standard PC with PCMCIA
support to build up the PCMCIA disk. Once the disk is built, we can then
remove the Compact Flash from the carrier and place it in the target
system for use.
IDE Descriptors
For Standard IDE devices the devices are referenced as shown in the
following table.
Standard IDE - RBF Descriptors
/hcfmt IDE primary master - Entire disk
/hc1fmt IDE primary master - Primary partition #1
/hc2fmt IDE primary master - Primary partition #2
/hc3fmt IDE primary master - Primary partition #3
/hc4fmt IDE primary master - Primary partition #4
/hdfmt IDE primary slave - Entire disk
/hd1fmt IDE primary slave - Primary partition #1
/hd2fmt IDE primary slave - Primary partition #2
/hd3fmt IDE primary slave - Primary partition #3
/hd4fmt IDE primary slave - Primary partition #4
/hefmt IDE secondary master - Entire disk
/he1fmt IDE secondary master - Primary partition #1
/he2fmt IDE secondary master - Primary partition #2
/he3fmt IDE secondary master - Primary partition #3
/he4fmt IDE secondary master - Primary partition #4
/hffmt IDE secondary slave - Entire disk
/hf1fmt IDE secondary slave - Primary partition #1