User guide

72 Enhanced OS-9 for X86 PCAT
1
Installing and Configuring Enhanced OS-9
*
* Intra Server DE504-BA (Quad)
* 10BaseT = INF_UTP ( note: preliminary release support for 21143. No
100BaseT support)
*
* Asante’ Fast 10/100
* 10BaseT = INF_UTP
* 100BaseT = INF_MII100
*
* D-Link DFE-500TX ProFast 10/100 Adapter
*
* 10BaseT = INF_UTP
* 10BaseT = INF_MII10
* 100BaseT = INF_MII100
*
*/
#define CONNTYPE INF_UTP
Finally, remake the descriptor: change to the
MWOS/OS9000/80386/PORTS/PCAT/SPF/SP21140 directory and
type:
os9make -f=spfdesc.mak
You have now created a new descriptor. Next time you run the Wizard,
it will use the new descriptor.
Adding support for dual and quad channel cards with the
Microware Wizard
The descriptors for the additional Ethernet ports must be added. Edit
the spf.ml file in the
MWOS/OS9000/80386/PORTS/PCAT/BOOTS/INSTALL/PORTBOOT
directory. Find the entry for spde0. Add spde1 for a dual card or spde1,
spde2 and spde3 for a quad card.
Next edit the pcat.ini file located in
MWOS/OS9000/80386/PORTS/PCAT/BOOTS/INSTALL/INI directory.
Look for the ETHER_OPTION_ string and add the entries as required.
You must specify the Ethernet information for all extra Ethernet ports
used.
The following example adds the three extra Ethernet ports for a quad
card.
ETHER_OPTION_2=enet1 address 112.16.1.237 broadcast
112.16.255.255 netmask 255.255.000.000 binding /spde1/enet