User guide

56 Enhanced OS-9 for X86 PCAT

Installing and Configuring Enhanced OS-9

NoteNote

The PCIV utility may be used to examine a network card. This utility

displays vendor and device ID’s for each installed PCI device.

To find out if your card has been tested with OS-9, run the pciv

command and look at the vendor and device ID’s. The vendor ID

should be 0x10B7 for all 3COM network cards. Network cards with the

following device ID’s have been tested with OS-9 drivers shipping with

this release.

3COM 3C509 0x5900

3COM 3C900-TPO 0x9000

3COM 3C900 0x9001

3COM 3C900B-TPO 0x9004

3COM 3C900B-CMB 0x9005

3COM 3C905-T4 0x9051 (2)

3COM 3C905B-TX 0x9055 (1)

3COM 3CSOHO100-TX 0x7646 (1)

Support for the following cards is included with the driver, however,

these cards were not tested prior to the release.

3COM 3C905-TX 0x9050

3COM 10/100 COMBO Deluxe 0x9058

3COM 10Base-T/10Base-2/TPC 0x9006

3COM 10Base-FL NIC 0x900A

3COM 100Base-FX NIC 0x905A