User guide

1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 53
NoteNote
Some Network Interface Cards require that a setup disk, included with
the card, is ran before the card is installed in a system running OS-9.
The setup disk is required for configuring the connection type for cards
which support multiple interfaces, such as connections for 10Base-T,
10Base-2 or AUI. The setup disk may also be needed to configure the
card for a specific interrupt or I/O address.
3COM PCI
3C900B-TPO - 10Base-T TPO NIC
3C900B-CMB - 10Base-T/10Base-2/AUI Combo
3C905-T4 - 10/100 Base-T4 (RJ-45) - 3C905-T4 Fast Etherlink XL
3C905B-TX - 10/100Base-TX NIC
3CSOHO100-TX - 10/100 Base-TX NIC - Office Connect 10/100
3C900-TPO - 10Base-T TPO NIC
System State Debugging - Supported
Default Settings
PORTADDR NA
IRQVECTOR NA
CONNTYPE INF_EXT /* Auto */
Solving Configuration Issues
Connection Type