User guide

44 Enhanced OS-9 for X86 PCAT
1
Installing and Configuring Enhanced OS-9
Building the Project
Now we are ready to build the project. Go to the Project menu and
select Build . Hawk will display a dialog box showing the progress of the
compilation of the security component. If no errors occur, the dialog box
will show Status: Done and you can dismiss the box by clicking the OK
button. If errors do occur, review the above procedures and be sure you
followed them exactly as outlined.
Loading and Executing the HomeWatch Application
To load the application, right click on security in the components box on
the left side of the Hawk IDE. When the context box appears, select
Load . Since this is your first time loading this newly created component,
a dialog box will appear asking for the name or IP address of the target
to load this component to (os9test in the preceding example). Type this
information and click on OK . The security module will then be loaded to
the target.
An additional file, which contains graphic assets, must also be loaded.