User guide
32 Enhanced OS-9 for X86 PCAT
1
Installing and Configuring Enhanced OS-9
NoteNote
Select the
User State Debugging Modules
checkbox to include the
Hawk debugging modules on the target system. Alternately, you may
load and run the modules from the hard disk on the target.
Step 18. Click
Build
to create the OS-9 boot image.
Step 19. Click
Makeboot
when the image is built. The following dialog box
appears:
Step 20. Insert a new floppy disk into your computer’s A drive and click
Yes
to
format it for OS-9 and copy the boot image. Select Finish, once the boot
image has been written to floppy. Exit the Configuration Wizard by
selecting
Exit
from the file menu. Save your changes when prompted.
Step 21. Test the new boot image by inserting the floppy into the drive on the
target system and rebooting. Verify that:
1.OS-9 boots, with the console appearing in the correct location,
either the monitor or the serial port.
2.You can telnet into the OS-9 computer, from the Windows
computer. For example, select
run
from the Windows start menu
and type
telnet OS9test
. Login as
super
with the password
user
.