User guide

1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 25
Step 3. Select Configure->Bootfile->Configure System Options from the menu.
Step 4. Click on the
Define /term Port
tab.
Step 5. Click on the
COM1
radio button to define the high-level console as
using serial port 1. Verify that the baud rate is set to 9600 baud. Click
OK
to continue. Note, leave the high-level console at VGA/Keyboard if
the monitor and keyboard will be used as the OS-9 system console.