User guide
20 Enhanced OS-9 for X86 PCAT
1
Installing and Configuring Enhanced OS-9
Step 8. Enable the
SoftStax (SPF)
radio button if using networking. Select the
Build
button to create the OS-9 boot image.
Insert a new floppy disk into your computer’s A drive and click
Yes
to
format it for OS-9 and copy the boot image. Select
Finish
and save your
changes, when prompted.
The newly created boot floppy can be used to bring OS-9 up on the X86
target hardware. The default OS-9 console is the target computer’s
monitor. If networking was enabled, it should be possible to
telnet
into