User guide

156 Enhanced OS-9 for X86 PCAT
1
Installing and Configuring Enhanced OS-9
Both Hawk and the Hawk profiler required that Windows95/98 or NT4.0
includes TCP/IP support and the IP address must be setup correctly to
allow connection to the target board. The target board IP address must
appear on the same physical network domain.
The target hardware should be running SoftStax (SPF). Also the
spfnppd and spfnppdc modules must be loaded. The spfnppd and
spfnppdc modules are located in MWOS/OS9000/80386/CMDS
directory.
$ load -d spfnppd spfnppdc
$ spfnppd &
If the resident tar images were used you may use the following script file
$ /h0/sys/startndpd_SPF