User guide
138 Enhanced OS-9 for X86 PCAT
1
Installing and Configuring Enhanced OS-9
ROM Utilities and Special Booters
llkermit
The llkermit ROM booter allows booting OS-9 over serial using Kermit
Protocol. You must select llkermit in the ROM options when creating the
boot image. Once the menu is displayed type ker. You should now be
able to send the image on the communications port.
llcis
The LLCIS ROM Sub-Booter allows PCMCIA devices to be initialized
for use.
The PCMCIA utility shares the same configuration information as the
LLCIS Sub-Booter.
MWOS/OS9000/80386/PORTS/PCAT/ROM/config.des
#define LLCIS_PORTcbase=0xd4000"
#define LLCIS_PARAMS"verbose=1 fixed=1"
#define IDE_CIS_PARAMS"ide0=0x320,0 ide1=0x360,0"
#define ETH_CIS_PARAMS"3com=0x340,3"
#define SERIAL_CIS_PARAMS"com=0x340,10"
The PCMCIA SOCKET SERVICES require a VADEM 465 or similar
controller.
• i82365sl step A
• i82365sl step B
• VLSI 82C146 - Note. Early versions of this chip will only work with
one socket due to chip bug.
•IBM
• Vadem
• Cirrus CLPD67xx
The PCMCIA SOCKET SERVICES do not use interrupts, and for IDE
based devices, no interrupts are used by default. If the PCMCIA device
does not work check what is reported during the boot process. The type
of PCMCIA controller as well as the device information is displayed. It