User guide

1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 133
The show information option will display the current thread states.
$ iniz hs02; dir /hs02; Symbios_info -s
PC-AT Compatible 80386 OS-9000 V2.2 for Intel x86
vector ($) prior drivstat irq svc driver
------------- ----- --------- --------- ------
74 ($4a) 10 $00f90fb4 $0013e6f1 scsi8xx
Dump Threads.... lst @ 0x00f866a0
lst->wakes = 0
chip free
id=00 Ent_WHICHPHASE Thread has completed operation
CMD[2a00000fffffffa80300000100 CMD_STATUS[00000000]
MSGI[00000000] MSGO[c00103010f0f0c100000000000000000]
lth->synctried = Yes
lth->widetried = Yes
lth->processid 00000003
lth->thread_sem is free
lth->xferflags 0000002d SCSI_ATN SCSI_SYNC SCSI_WIDE SCSI_ULTRA
lst->sbclmaster 00000098 lth->sbclmask 00000098 sxfr 2f scntl3 9d
id=01 Thread not in use
id=02 Thread not in use
id=03 Thread not in use
id=04 Thread not in use
id=05 Thread not in use
id=06 Thread not in use
id=07 Ent_WAITFORRESELECT SCSI SELFID
id=08 Thread not in use
id=09 Thread not in use
id=0a Thread not in use
id=0b Thread not in use
id=0c Thread not in use
id=0d Thread not in use
id=0e Thread not in use
id=0f Thread not in use
The show registers option will show the current Symbios internal
registers. Not all registers are displayed, only registers that are safe to
display. Use this option with care. The SCSI bus should be idle when
using this option.
$ iniz hs02; dir /hs02; Symbios_info -r
PC-AT Compatible 80386 OS-9000 V2.2 for Intel x86
vector ($) prior drivstat irq svc driver
------------- ----- --------- --------- ------
74 ($4a) 10 $00f90fb4 $0013e6f1 scsi8xx
Location Value Register Status
--------------------------------------------