User guide

1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 131
Options
All command line arguments are required, save that the presence or
absence of <value> indicates whether to read or write the specified
information.
<bus> PCI bus number (0..255)
<dev> PCI device number (0..32)
<func> PCI function number (0..7)
<offset> offset value (e.g. 4 for command register offset)
<size> size (b = byte, w = word, d = dword)
<value> if present, the specified value will be written; if not present,
the value will be read
Example
$ setpci 1 13 0 0x10 d
PCI READ MODE
-------------
PCI Value.....0x0000e001 (dword) READ
PCI Bus.........0x01
PCI Device......0x0d
PCI Function....0x00
PCI Offset....0x0010
SYMBIOS_INFO
When using the Symbios SCSI controller family of cards, you may use
this utility to see how drives in the system have been configured.
The ’Symbios_info’ utility provides a simple means to determine how
the current SCSI drive parameters have been utilized. Symbios
810-875 controllers are supported. The device should be inized prior to
using this utility. On initial access of any device, the information is
stored in the SCSI internal threads. The ’Symbios_info’ function will
examine the thread information.