User guide

1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 129
(Super)[/r0/>] chd /pcmhe1
(Super)[/pcmhe1/>] free
"pcmhe1"
Capacity: 43967 blocks, 1373.968 Mbytes
Free: 28681 blocks, 896.281 Mbytes
Largest Free Block: 13036 blocks, 407.375 Mbytes
(Super)[/r0/>] pcmcia -d -s=1
socket1: occupied
It is now save to remove the card is socket #01
MWOS/OS9000/80386/PORTS/PCAT/ROM/config.des
#define LLCIS_PORT"cbase=0xd4000"
#define LLCIS_PARAMS"verbose=1 fixed=1"
#define IDE_CIS_PARAMS"ide0=0x320,0 ide1=0x360,0"
#define ETH_CIS_PARAMS"3com=0x340,3"
#define SERIAL_CIS_PARAMS"com=0x340,10"
The PCMCIA SOCKET SERVICES require a VADEM 465 or similar
controller.
• i82365sl step A
• i82365sl step B
• VLSI 82C146 - Note. Early versions of this chip will only work with
one socket due to chip bug.
•IBM
• Vadem
• Cirrus CLPD67xx
The PCMCIA SOCKET SERVICES do not use interrupts and for IDE
based devices no interrupts are used by default. If the PCMCIA device
does not work check what is reported during the boot process. The type
of PCMCIA controller as well as the device information is displayed. It
may be that another device is using the memory at 0xd4000. If this is
the case change the value in config.des. The Wizard will use this value
next time you create a boot image.