User guide

122 Enhanced OS-9 for X86 PCAT

Installing and Configuring Enhanced OS-9

Edit the pcat.ini in the directory

MWOS\OS900\80386\PORTS\PCAT\BOOTS\INSTALL\INI

directory and search for ETHER_OPTION_0.

Setup SLIP as required.

ETHER_OPTION_0=slip0 address 10.0.0.1 destaddr 10.0.0.2 binding

/spsl0

Make sure SLIP is selected in the SPF/OPTIONS tab.

Go into the Wizard and select Enable Softstax just as you would for an

Ethernet based connection. Build the boot.