User guide

1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 119
Remove the # and specify the ID required.
Driver name: scsi8xx
Rom driver name: ncr8xx
Adaptec 1540/1542 ISA
Support for Adaptec 1540 series is provided, this includes 1540, 1542
and 1542CP. The driver probes the DMA channel used, but the port
address and interrupt are fixed. If the vector does not match the card, a
Bad Mode error is returned. You may set up the descriptor to use vector
zero, which forces the driver to use what the card reports.
#defineBASE_AHA15400x00000330
#defineVECT_AHA15400x4b
Driver name: aha1540
Rom driver name: ll1540
Adaptec 2940, 2940U and 2940UW
Support for Adaptec PCI series AHA2940, 2940U and 2940UW is
provided. Only one SCSI controller of this type is allowed.
Driver name: aic7870
Rom driver name: ll7870
SCSI Descriptors
SCSI HARD - RBF Descriptors
/hs<id>fmt id= SCSI ID (1-f) - Entire disk
/hs<id><part>fmtid= SCSI ID (1-f) part= partition
/hs<id><part> id= SCSI ID (1-f) part= partition
SCSI HARD - PCF Descriptors
/mhs<id><part> id= SCSI ID (1-f) part= partition
SCSI FLOPPY - RBF Descriptors