User guide

1
Installing and Configuring Enhanced OS-9
Enhanced OS-9 for X86 PCAT 115
NoteNote
We have changed the default to IO_MAPPED for X86 due to problems
on PCAT based motherboards.
Prior to this release the following Symbios devices were supported:
Number of devices supported (2)
DEVICEWIDEULTRA1ULTRA2FIFO_SIZEBURST
----------------------------------------------------------------
Symbios 53c810N/AN/AN/A6416
Symbios 53c825NoN/AN/A8816
This release adds the following:
Number of devices supported (12)
DEVICEWIDEULTRA1ULTRA2FIFO_SIZEBURST
-------------------------------------------------------------
Symbios 53c810N/AN/AN/A6416
Symbios 53c810APN/AN/AN/A6416 (1)
Symbios 53c815N/AN/AN/A6416 (1)
Symbios 53c820YesN/AN/A8816 (1)
Symbios 53c825YesN/AN/A8816
Symbios 53c825AYesN/AN/A536128
Symbios 53c875YesYESN/A536128
Diamond FirePort20YesN/AN/A536128 (825A)
Diamond FirePort40YesYESN/A536128 (875)
Symbios 53c860YesYESN/A536128 (1)
Symbios 53c885YesYESN/A536128 (1)
Symbios 53c895YesYESYES536128 (1,2)
Symbios 53c896YesYESYES536128 (1,2)
1. Support is included but untested.
2. Support for 895 and 896 is only available with out ULTRA support.
The 160Mhz clock will be enabled on a future release. Note the 895
and 896 have not been tested.
[Symbios 53C810]
[Symbios 53C810A]
Device supports burst op code fetch