User`s manual
Data Recovery Using R-Studio
60
© 2002...2013 R-Tools Technology Inc.
> R-Studio will start creating the image, the Progress message showing the progress.
To process an already created Image, the image file should be opened.
To open an image
1 Click the Open Image button, or
Select Open Image File on the Drive menu
If a remote computer is connected for Data Recovery over Network, the Open Image File dialog box will
appear when you select a place to load the image file from. You may load it from the local or remote
computer.
2 Select the required image file
> An Image object will appear on the Drives panel
Depending whether this is a byte-by-byte or compressed (R-Drive Image compatible), its appearance in
the Drives panels is different.
You may perform all data search, scan, and recovery from this image as it were a regular drive/disk object.