User`s manual
Technical Information and Troubleshooting
188
© 2002...2013 R-Tools Technology Inc.
response time less than 4 hours.
4.10 Properties Tab
Object size units
You may select the units in which the information on object sizes will be displayed. Some parameters can be
edited when the Debug mode is turned on on the Main dialog box of the R-Studio settings.
To select the units
1 Select Properties on the View menu
2 Select the units in which you want to see object sizes.
You may select
Show as Bytes
Show as Sectors
Show as Bytes and Sectors
1.Basic information
This section shows basic information for a disk object.
More information...
Drive Type
Device/disk type and subtype. Current R-Studio version supports the following types:
Disk, WORM, CDROM, Optical, Changer, Floppy, RAM Disk, LDM Partition, LDM
Component, LDM Volume
and subtypes:
Device, OS File, Physical Drive, Mount Point, Partition, Volume Set, Mirror, Stripe Set,
RAID 4, RAID 5, RAID 6
Name
Device/disk name
Size
Device/disk size
Bus Type
Device/disk bus type. Can be:
IDE/ATA, IDE/ATAPI, SCSI, Floppy, USB, 1394, SSA, FibreChannel, RAID, SMART, ABIOS
2.Information on hard drives and logical disks
This section shows available information on hard drives and logical disks. These properties depend on the
drive/disk type and appear only when applicable. Under Windows NT/2000/XP/2003/Vista/2008/7, an IDE
drive/disk may be represented as a SCSI device, that is why the SCSI Address section appears under these
OSes for those drives/disks.
More information...
OS object
Appears for image files under Windows 9x/ME and NT/2000/XP/2003/Vista/2008/7,
for drives/disks under Windows NT/2000/XP/2003/Vista/2008/7 only. An object
name used by OS to access the device/disk.
R-Studio driver
Driver names (both internal and OS) used to access this drive/disk.
Sector Size
Drive/disk sector size
Physical Drive
Geometry
This section shows physical geometry for a hard drive. For a logical disk it shows the
physical geometry for a hard drive where the logical disk resides
Cylinders
Tracks Per Cylinder
Sectors Per Track