Specifications

Page 88 DocSTAR Level 2 Service Training Workbook
Two-Tier Storage Utilities
Once the Two-Tier storage setup has been completed you may begin using any of the
provided Two-Tier storage utilities. Selecting the ‘Two Tier’ button from the administration
program accesses the utilities. You will see the following screen:
The four Two-Tier Utilities are outlined below:
Update Archive Disk: Allows you to copy the updated or new files
from RAID to the corresponding Archive Disk.
(Usually image files that have updated tags or
new annotation files).
Recreate Archive Disk: Allows you to recreate an existing archive
Disk. (In the event that the original archive
disk is lost or damaged).
Move Two-Tier Volume to Archive Disk: Allows you to free up space on the RAID
device by creating a copy of an archive
volume to be used for retrieval. The space
for that volume is then reclaimed in the RAID
by deleting it from RAID. (In the event that
the RAID device becomes full and no
additional RAID devices will be attached).
Move Archived Volume to Two-Tier: Allows you to add archive volumes to the
RAID device. (Usually used when RAID is
installed for the first time or being recreated).