Specifications

Page 76 DocSTAR Level 2 Service Training Workbook
The * next to the ID # denotes that the internal RAID is the boot device.
After pressing <Ctrl F> you will see the FastBuild Utility Main Menu as shown below:
You may select any of the options listed by pressing the corresponding number. If you
select ‘Auto Setup [1]’, to create an array on a blank set of drives then you will see the
following screen, you should set the options as listed below:
FastTrak66 (tm) BIOS Version 1.xx (Build xx)
(c) 1995-2000 Promise Technology, Inc. All rights reserved.
ID MODE SIZE TRACK-MAPPING STATUS
_________________________________________________________________
1 * 1x2 Mirror 29188M 3720/255/63 Functional
Press <Ctrl-F> to enter FastBuild (tm) Utility...
FastBuild (tm) Utility 1.xx (c) 1996
-
2000 Promise Technology, Inc.
[ Main Menu ]
Auto Setup...................[ 1 ]
View Drive Assignments.......[ 2 ]
Define Array.................[ 3 ]
Delete Array.................[ 4 ]
Rebuild Array................[ 5 ]
Controller Configuration.....[ 6 ]
[ Keys Available ]
Press 1..6 to Select an Option [ ESC ] Exit