Specifications

DocSTAR Level 2 Service Training Workbook Page 75
Below is a view of the drive bay from the rear.
Below is a view of the drive bay from the front.
The hard drives are installed inside of the drive carrier, below is a picture of the drive
carrier.
In addition to the hardware shown, the RAID Controller BIOS must be entered to define an
array (if one has not already been defined) or delete an array (if one is to be deleted and
recreated). Note: It is not generally required to enter the BIOS and change these
settings since they are shipped pre-defined.
To enter the BIOS you must reboot the Host unit and wait for the following screen to
appear and press <Ctrl-F>: