Specifications

DocSTAR Level 2 Service Training Workbook Page 39
The default settings for the Network Interface Card Properties are usually adequate
unless problems are encountered. See Figure 3.12.
Figure 3.12 Intel(R) PRO/100+ Management Adapter Properties
The default settings for the NetBEUI Network Protocol Properties are also adequate
unless problems are encountered. See Figure 3.13.
Figure 3.13 NetBEUI Properties
If you will be using the IPX/SPX Network Protocol you should verify that the ‘I want to
enable NetBIOS over IPX/SPX’ option is selected in the properties for the IPX/SPX-
Compatible Protocol. See Figure 3.14.