User`s guide

17
Troubleshooting
3
Follow the onscreen instructions.
If Windows 95 does not detect the SlimSCSI 1480, run the Add New
Hardware Wizard again:
1
Double-click Add New Hardware in the Control Panel.
2
Select No on the second screen of the wizard.
3
Select SCSI controllers on the next screen.
4
Select the model of your Adaptec SCSI adapter.
If the SlimSCSI 1480 is not listed, you may be able to install the
driver from the Windows 95 CD-ROM. To do this, follow these
steps:
1
Place the Windows 95 CD-ROM in your CD-ROM drive and
run the Add New Hardware wizard.
2
Select No on the second screen of the wizard.
3
Select SCSI controllers on the next screen.
4
Click the Have Disk button, then click the Browse button.
5
Look in the \drivers\storage directory of the CD-ROM and
select the model of your SCSI adapter.
The SlimSCSI 1480 software driver does not appear under the SCSI
Controllers icon in Device Manager. However, there is a listing for
PCMCIA CardBus Controller under the Other Devices icon in Device
Manager. What does this mean?
The SlimSCSI 1480 driver is not loading and must be reinstalled. Fol-
low these steps to reinstall the driver:
1
Insert the SlimSCSI 1480 driver diskette in the floppy disk
drive.
2
Double-click the Add New Hardware icon in Control Panel.
3
Select No on the second screen of the wizard.
4
Select SCSI controllers on the next screen.
5
Click the Have Disk button, and then click OK.
6
Select Adaptec APA-1480 CardBus Controller.