Specifications

3
3-3
Product Specifications
APA-1460 SlimSCSI Technical Reference
Stock Number: 510671-00, Rev. A Page: 3-3
Print Spec Number: 492966-00, Rev. A
Current Date: 8/22/94 ECN Date: 8/30/94
▼ ▼ ▼ ▼ ▼
Electrical Specifications
PCMCIA
Electrical Specification: PCMCIA Release 2.1
Transfer Rate: 2 MBytes/sec. (16-bit data path)
Data Path: 8- or 16-bit
Voltage Requirements: +5 V dc
Power Consumption: 500 mW (est.)
I/O Addressing
Requirements: 32 consecutive addresses, 1 of 2 ranges possible
Interrupt Channels: 1 of 4 options (9, 10, 11, 12)
SCSI
Electrical Specification: ANSI X3.131-1986
Transfer Rate: Up to10 MBytes/sec. synchronous mode (Fast SCSI)
Data Format: 8-bit with parity
Termination: Active
Termination Power: Not provided (causes excessive battery drain on host)
Cable wire: 32 wires with 5 individual bundles and impedance matched
80 ohm, high-performance cable
Mechanical Specifications
Form Factor: APA-1460 Card, PCMCIA Type II
with 32-wire SCSI Cable, optional high or low density SCSI
connector
APA-1460 Card Dimensions
Length: 3.370 inches (85.60 mm)
Width: 2.126 inches (54 mm)
Height: 0.196 inches (5 mm)
PCMCIA Connector: 68-pin (2 row x 34 pin) female, keyed
Card/Cable Connector: 32-pin (1 row x 32 pin) female, keyed
APA-1460 Cable Dimensions
Length: 3 feet
SCSI Connector: 50-pin shielded male (Centronics-style), high or low density
Card/Cable Connector: 32-pin (1 row x 32 pin) male
Note: Detailed mechanical drawings of the Card and Cable are
available.