Specifications

Specific Problems and Corrective Actions
007-4276-001 81
Iftheproblempersists,theremaybeaproblemwiththediskettedrive,baseboard,or
drive signal cable. Contact your service representative or authorized dealer.
Hard Drive Activity Light Does Not Light
If you installed one or more hard drives in your system, check the following:
Are the power and signal cables to the drive properly installed?
Are all relevant switches and jumpers on the hard drive and adapter board set
correctly?
Is the hard drive properly configured?
CD-ROM Drive Activity Light Does Not Light
Check the following:
Are the power and signal cables to the CD-ROM drive properly installed?
Are all relevant switches and jumpers on the drive set correctly?
Is the drive properly configured?
Is the onboard IDE controller enabled?
Note: The hard drive activity light on the front panel lights when a SCSI device
controlled by the onboard SCSI host controller is in use. This LED does not display
CD-ROM activity.
Problems with Application Software
Check the following:
Verify that the software is properly configured for the system. See the software
installation and operation documentation for instructions on setting up and using
the software.
Try a different copy of the software.
Make sure all cables are installed correctly.