Specifications

Baseboard
007-4276-001 27
Figure 2-1 Memory Retention Bar
A. Captive screw
B. Memory retention bar
C. Clip at the rear of the chassis
Installing the Memory Retention Bar
1. Slip slots in the memory retention bar into the clip located at the rear of the chassis.
The clip is noted by “C” in Figure 2-1.
2. Secure the other side of the memory retention bar with the captive screw, as shown
in Figure 2-1.
Baseboard
This section covers the removal and installation of the baseboard, which requires the
removal and installation of baseboard components. The baseboard resides in the E-Bay.
The front, right, back, and left sides of the E-Bay are marked in Figure 1-4 on page 6.
C
A
B