Specifications

Baseboard Connectors
007-4276-001 125
*Type (in/out) is from the perspective of the baseboard.
Termination Card
You must install a termination card in any vacant processor card slot to ensure reliable
system operation.
The termination card contains AGTL+ termination circuitry, clock signal termination,
and test access port (TAP) bypassing for the vacant connector. The system does not boot
unless all slots are occupied with a processor or termination card.
Server Monitor Module Connector (J7H1)
The baseboard supports the server monitor module (SMM) feature connector. Table A-27
shows the pinout of the 26-pin baseboard connector.
B9 PWRGOOD
B10 VSS6 POWER
B11 VCCP7 POWER
B12 VSS7 POWER
B13 VCCP8 POWER
B14 VSS8 POWER
B15 VCCP9 POWER
B16 VSS9 POWER
B17 VCCP10 POWER
B18 VSS10 POWER
B19 VCCP11 POWER
B20 VSS11 POWER
Table A-26 (continued) Processor VRM Connectors (J2A2, J2B1, J2C1)
Pin Signal Type*