Introduction 2 Plug the 50-pin connector on the end of the SlimSCSI cable into the removable drive, as shown below: This document explains how to install and use SlimSCSI® for Removable Drives model APA™-1450A PC Card-to-SCSI adapter. The SlimSCSI adapter allows you to easily connect removable drives to portable PCs running under Windows® 95.
SCSI device in the daisy chain). Usually, you terminate the device by setting a jumper or switch near the SCSI connector on the back of the device. See the device documentation for more information. 5 Be sure that each SCSI device has a unique SCSI ID, ranging from 0 to 6. (The SlimSCSI adapter uses SCSI ID 7.) The SCSI ID is usually set with jumpers or switches on the back of the device. See the device documentation for more information.
6 Press Esc. When the confirmation prompt appears, The SlimSCSI adapter terminates itself but does not provide termination power to other devices on the SCSI bus, because it would need to draw this power from the portable PC’s battery. Most removable drives and other SCSI devices do supply termination power for themselves. select Yes and press Enter to create the partition. 7 Press Esc to return to the Select SCSI Device to Partition window. 8 To quit afdisk, press Esc and select Yes.
