User`s manual

3-7
Chapter 3: Troubleshooting
2. When you are prompted to specify the mass storage devices, press S.
3. Provide the driver disks included with the motherboard. Also refer to
article ID# Q192163 in Microsoft's Knowledge Base web site.
Question: Do I need to change a jumper or BIOS setting for
running dual processors?
Answer: No jumper or BIOS setting changes are necessary whether
running a single or dual processor on the P6DGS/P6DGE/P6DGU board.
Also, if running a single processor, it can be installed in either CPU slot,
although we recommend using the slot nearest to the chipset (J2).
Question: Why can't I change the CPU core/bus ratio with JB1-
JB4?
Answer: Some processors have preset core/bus ratios and therefore
cannot be changed by jumper settings
More technical information is available on our web site at
http://www.supermicro.com/TechSupport.htm. You can also e-mail our
Technical Support group for assistance at [e-mail].
3-4 Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is
required before any warranty service will be rendered. You can obtain
service by calling your vendor for a Returned Merchandise Authorization
(RMA) number. When returning to the manufacturer, the RMA number
should be prominently displayed on the outside of the shipping carton and
mailed prepaid or hand-carried. Shipping and handling charges will be ap-
plied for all orders that must be mailed when service is complete.
This warranty only covers normal consumer use and does not cover dam-
age incurred in shipping or from failure due to the alternation, misuse, abuse
or improper maintenance of products.
During the warranty period, contact your distributor first for any product
problems.