User`s manual

SUPER P6DGS/P6DGE/P6DGU/P6SGU Manual

2-4

Figure 2-3. Attaching the Fan Power Cable

Installation of the Universal Retention Mechanism

(URM)*

Please Note! Screws and washers attach from the bottom of the

board and must be installed

before mounting the board to the

chassis. (See Figures 2-4 and 2-5.)

1. When installing the URM, make sure that the

Left

(L) and the

Right

(R) sides are placed accordingly.

2. Lift both arms upright and slide the processor into the socket,

noting that the notches need to line up.

*These directions may not apply to second source URMs

See note at bottom of previous page.