Operation Manual

Figure Ⅰ Projector Overview
Note: Reset the unit if it freezes and/or is not working properly. Insert a thin, pointed
object into Reset button(as shown in Figure Ⅰ ), the unit will turn off, reset itself and turn
back on automatically.
Basic Operation
1、Power on
● Press and hold the "POWER" button for approximately three seconds to turn the unit
on. The projector will enter the "Home" Menu. If battery is too weak to power on, please
recharge before power on or power on while charging (altough this is not recomended).
● Use “LEFT” or “RIGHT” buttons to highlight corresponding storage device icon,
and press “OK” to select and enter Media Menu.
Home Menu
2、Photo Mode
● Press “PHOTO” icon on “Media Menu” and press “OK” to enter Photo Mode.
● Under photo mode, using “LEFT” or “RIGHT” button to select photo.
● Under photo mode, press “OK” button,the control bar hidden
under the bottom of the screen will pop up, using “LEFT” or “RIGHT” button to select.
If no operation for ten seconds or by pressing “M” button, the control bar will auto hide.
Select button to Magnify photo; button to Rotate photo and button
to LCD Setup.
● Using “M” button to return to previous menu in turn.
N-5-
N-6-