Adapt Pico Play ADPP-99 User Manual Operating Instructions Notice: Please read the user manual carefully before using this product
Safety and Maintenance Instruction NTable of Contents Safety and Maintenance Instruction ……………………………… Functions Overview ………………………………………………… Product Specifications ……………………………………………… Product Overview …………………………………………………… Basic Operation ……………………………………………………… System Setup ………………………………………………………… Battery Recharging ………………………………………………… Trouble Shooting …………………………………………………… Accessories …………………………………………………………… To Prolong the life of the mini projector all the following safety, operating instructions and mainte
Functions Overview ● Power supply: DC +5V/2.5A DC terminal:3.5*1.3*8MM ● Power consumption: 4.5W ● Built-in speaker: 3.7V/1500 mAH ● Battery charging time: approximately 80 minutes 1. Photo format: JPEG 2. Video format: AVI、RM/RMVB、3GP、MPG/MPEG 、MP4 3. Music format: MP3、WMA 4. Basic setup function 5. Photo, music & video stored in mobile phone, U-DISK & IPod (Nano/Classic) can be played via USB 6. Support IPhone 3G and above, iPod NANO 4 & above. Supports iPhone 4, iPAD and iPOD touch.
Figure Ⅰ Projector Overview Note: Reset the unit if it freezes and/or is not working properly. Insert a thin, pointed object into Reset button(as shown in Figure Ⅰ ), the unit will turn off, reset itself and turn back on automatically. ● Use “LEFT” or “RIGHT” buttons to highlight corresponding storage device icon, and press “OK” to select and enter Media Menu. Basic Operation 1、Power on ● Press and hold the "POWER" button for approximately three seconds to turn the unit on.
3、Music Mode ● Select “Music” icon on “Media Menu” and press “OK” to enter Music Mode. ● Under music mode, using “UP” or “DOWN” to select music and pressing “OK” to play. ● Under music mode, press “OK” button, the control bar hidden under the bottom of the screen will pop up, using “LEFT” or “RIGHT” button to select. If no operation for ten seconds or by pressing “M” button, the control bar will auto hide.
System SETUP １.Slide Show Settings ● Slide Show: Slide show settings ● Language: Language settings ● Keystone: Keystone correction settings ● About: Display current software version ● Default Restore to system default settings Operating method:use the “LEFT”,”RIGHT” button or “UP”,”DOWN” buttons to select,then press “OK” to enter detailed setting. The “M” button will revert you back to the home menu. ● Slide Speed: set slide show speed ● Transition: set transition effect 1. None 2. Random 3.
prev. menu. 3. Keystone Correction Settings Select “Keystone” icon on “SETUP”,then press “OK” button to enter keystone correction settings. Operating method: using “LEFT” or “RIGHT” button to choose desired parameter values, then press “OK” button to confirm. “M” button will revert you back to the prev. menu. 4. About: This displays the current software version 5. Default: This will restore to the system default settings 4.
5 No image when AV input 2. USB cord 1 piece ● CVBS cord is not connected or there is a connection error. Make sure the CVBS cord is properly connected. ● Poor contact or the CVBS cord is with quality problems. Make sure the connection with CVBS cord is perfect and the cord itself is of good quality. Accessories Carefully unpack the package and make sure that you have all the following items.
