Installation Instructions

P. 1

4814118 K-6957A U-shaped under sink organizer instruction

Parts list

#2 #3

DESCRIPTION QTY

#1. Under sink organizer 1

#2. Sliders 1 left side, 1 right side

#3. Plastic mounting brackets 2 each, 1 per side

#4. Slider mounting screws 8

#5. Organizer mounting screws 4

Install on bottom of cabinet 30” or wider

REQUIRED TOOLS

(not provided)

⊙ Drill

⊙ 1/16" Drillbit

⊙ Screwdriver

PAGE 1
Parts list #1 #2 #4 #5 DESCRIPTION #1. Under sink organizer #2. Sliders #3. Plastic mounting brackets #4. Slider mounting screws #5. Organizer mounting screws #3 QTY 1 1 left side, 1 right side 2 each, 1 per side 8 4 Install on bottom of cabinet 30” or wider P.
PAGE 2
Bottom mounting instruction Step 1 Screw under sink organizer (#1) to the sliders (#2) using 4 (#5) screws. Make sure the front of the under sink organizer is located on the end of the slider with the large bracket. Step 2 Place plastic mounting brackets (#3) on sliders (#2) and place assembly in cabinet at desired location. Step 3 Using a pencil, mark the mounting holes (2) in the front brackets and (2) in the plastic mounting brackets for each slider. P.
PAGE 3
Bottom mounting instruction – continued. Step 4 Remove under sink organizer assembly from cabinet and drill 1/16” pilot holes in the marked locations. . Step 5 Screw plastic mounting brackets to back wall using 4 screws (#4). Step 6 Reinstall the under sink organizer assembly in plastic mounting brackets and install 4 screws (#4) in the predrilled pilot holes of front mounting bracket.