Installation Instructions

P. 4
4814116 K-6951A 15” Cookware organizer instruction
Upper lid rack side mounting instruction
Step 1 Hold the left hand slider (#2) against the insider of the cabinet face
frame at desired height (Typically between 14”- 15”). Make a pencil
mark at the top of the front bracket. Use a tape measure and record
the height from the bottom of the cabinet to this mark.
Note: Take in to
consideration the sizes
of items that will be
stored.
Step 2 Mark a line on the back wall at the same height
as mark made in the previous step, close to
where the plastic mounting bracket (#6) will be
located.
Note: The top of the front mounting bracket
and the top of the plastic mounting bracket
should be the same height.
Step 3 Hold the slider at the previous location and level to the bottom of the
cabinet and mark the mounting hole in the front bracket that is closest
to the center of the cabinet face frame. Drill a 1/16”pilot hole and
temporarily install the slider using screw (#4).
Note: Front slider
bracket should not
extend beyond the
front of the cabinet
face frame or it will
interfere with the
closing of the cabinet
door.