Installation Instructions

ManualsBrandsadapt ManualsCabinet Organization & Accessoriesadapt.™ 15" Soft-Close Chrome Cookware Organizer - 2-Piece

1

2

3

4

5

6

7

Page 5 - Revision 03

HORIZONTAL LINE

VERTICAL LINE

HORIZONTAL LINE

VERTICAL LINE

Remove the Slide and hold

the Plastic Bracket on the

cabinet back wall making

sure to line up the top of

Plastic Bracket with the

horizontal line made in Step

B1 and the center of Plastic

Bracket holes placed on the

vertical line.

Mark the location of the two

holes in the Plastic Bracket.

Drill 1/16” pilot holes in the cabinet

back wall and install the Plastic

Bracket using (2) Slide Screws.

Insert Slide in the Plastic Bracket and

reinstall the Slide Screw in the front

mounting bracket hole in the Slide.

REPEAT THESE STEPS ON THE RIGHT

SIDE OF CABINET USING SAME

MEASUREMENTS AS THE LEFT SIDE.

Install the Pot Rack onto the Slides

using four Rack Screws.

If the Lid Rack is to be side mounted without the adapter blocks, repeat Steps B1 to

B8 for the Lid Rack.

Step B5

Step B6

Step B7

Step B8

Step B9

Side Mount (w/o Adapter Block) - STOP