Installation Instructions

Page 2 - Revision 03
Screw the Pot Rack to a left and
right Slide using (4) Rack Screws.
Place a Plastic Bracket on each
Slide and place the assembly in
the cabinet.
NOTE: For a face-frame cabinet,
make sure the Slides are located
as to not strike the face-frame
during operation.
Using a pencil, mark two mounting
holes in the front brackets of the Slides. Also mark the two holes in each Plastic
Bracket.
Remove the assembly from the cabinet.
NOTE: For most installations, it is recommended that either the Pot Rack or Lid
Rack be installed on the bottom of the cabinet, and the remaining rack be
side mounted in the cabinet.
NOTE: Although the instructions show only the Pot Rack in the pictures for Bottom
Mount, Side Mount (w/o Adapter Block) and Side Mount with Adapter Block,
the same steps can be used to install either the Pot Rack or the Lid Rack.
STEP A1
STEP A2
STEP A3
Bottom Mount - START HERE