User's Manual

SCREEN WITH NO VIOLATION INDICATION SCREEN WITH VIOLATION INDICATION
5. STOP RECORDING: When you need the datalogger to STOP recording temperature – press &
hold the button on the device for atleast 3 seconds until the END icon starts blinking on the
display.
6. END MODE : Once ‘Stop Recording’ is instructed by pressing the button for 3 seconds - the
Datalogger enters END Mode.
Visually you can identify that a datalogger is in END
mode, by finding that the display shows an END
icon at the top.
This state means that the datalogger is currently no
more logging temperature.
On 1
st
Click (Clicked when screen is OFF)::
Shows Maximum temperature of the Trip
On 2
nd
Click (Clicked within 3 secs of 1
st
Click):
Shows Minimum temperature of the Trip
On 3
rd
Click (Clicked within 3 secs of 2
nd
Click):
Average temperature of the Trip
ACTION