Installation Instructions

2 of 8

Speciﬁcations

PART NUMBERS & LOCATIONS

CIRCUIT BOARD PART NUMBER LOCATION

PS-EXIT 31-0725 Power Supply

Battery Backup System Kit BBK-EXIT Power Supply

PS-EXIT VOLTAGE MEASUREMENTS

• OUT1/OUT2 when IN1/IN2 is OPEN: less than 1.6 VDC

• OUT1/OUT2 when IN1/IN2 is CLOSED: 24 – 26 VDC

• OUT1/OUT2 are rated at a maximum output current of 400 mA each.

LED INDICATORS

LED COLOR STATUS

Main Power RED ON when AC power is on

FIRE GREEN ON if no ﬁre alarm condition

OUT1 GREEN ON during OUT1 unlock time interval

OUT2 GREEN ON during OUT2 unlock time interval

IN1 GREEN ON when contacts at IN1 are closed

IN2 GREEN ON when contacts at IN2 are closed

NOTE: The board must be replaced if OUT1 is on when IN1 is open or if OUT2 is on when IN2 is open.

PS-EXIT IS CLASSIFIED UNDER THE FOLLOWING UL294 PERFORMANCE LEVELS

• Endurance, Level IV

• Line Security, Level I

• Destructive Attack, Level I

• Standby Power, Level IV (with battery backup system BBK-EXIT)