Specification Sheet

MS1847 Series MS
®
Deadlock/Deadlatch
Operation
Can be operated by a standard cylinder, so the glass door
may be keyed-in with other types of doors. Three hub slot
positions allow installation even where jamb and stile design
provides severely limited turn clearance.
Specifications
LATCH VERSION
• The same stainless steel hookbolt, but spring-loaded
for automatic latching, is provided by the MS1847-11
and MS1847-13. All dimensions and available
accessories for the MS1847 deadlocks also apply to
MS1847 deadlatches.
CASE
• Stainless steel, measures 1/2" x 3-3/16" x 1-1/8".
ANTI-LIFT BOLT
• Three-ply laminated stainless steel. Designed to withstand
approximately one-half ton force, either horizontal or
vertical. Anti-lift bolt stops both door-from-jamb pry bar
attacks and attempts to lift the door from its track.
FACE
• Rectangular or full radiused ends (see table on back of
page for dash numbers).
STANDARD PACKAGE
• Case-packed with machines screws for mounting.
Shipping weight: 1/3 lb.
MS1847 SERIES MS
®
DEADLOCK/DEADLATCH
The MS1847 Deadlock/Latch for ultra-narrow stile siding
doors features a self-protecting bolt with adjustable
bolt projection.
Function
A compact lock designed to fit within very narrow sliding door stiles without
compromising the high degree of security these doors need. The sturdy
stainless steel bolt has two important features not usually found in sliding
door hardware. First, it is adjustable: a full 3/16" lengthening or shortening of
bolt projection is possible by turning an exposed screw in the face of the lock.
This can compensate for considerable misalignment between door and jamb.
Second, the MS1847 bolt is self-protecting: if the door is closed with the bolt in
the locked position, the bolt will retract immediately on contact with the jamb,
thus preventing damage or accidental lock-out.
FULL GLASS
ALUMINUM
GRADE 1
E8291
MS1847
MS1847-02
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADL OCKS
DL-7