Specification Sheet

8800 SERIES (LIFE-SAFETY)
NARROW STILE RIM EXIT DEVICE
Strike
• Made of hardened steel. Standard strike and narrow versions for centering
doors in 4" jamb. (Both strikes are included.)
Removable Mullion - 3890
• Allows the use of rim exit devices on paired
doors without narrowing the doors. Provides
higher security and better traffic flow than
paired doors with vertical rod exit devices.
Available in anodized 313 and 628. Specify
door height when ordering.
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation
for quiet environments such as hospitals, offices, hotels, and libraries
where solenoid-driven devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The EL Option is offered only for our Rim Exit devices and uses a
solenoid mounted in the pushbar for instantaneous unlocking and locking
of the rim exit device from a remote location or access control device.
The EL option is available for rim exit devices only.
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify
management of unauthorized exit. Available on minimum opening width
36". Cannot be ordered with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be
used to activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit
devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable
that the end caps match the finish of the exit device. Available for US
finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above
please see the Accessories page of the EXIT DEVICE section of this catalog.
13/16"
20.6mm
13/16"
20.6mm
2"
50.8mm
2-3/4"
69.9mm
1/2"
12.7mm
2"
50.8mm
2-3/4"
69.9mm
1/2"
12.7mm
1-21/32"
42.1mm
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no
outside operation
No outside operation –
pull only when dogged
Night latch – key retracts latch Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Rim Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits. Adams Rite exit devices are operable by either rim or
mortise cylinders depending upon the ANSI/BHMA functions
of the exit device.
Entry trim and fixed pulls. 4605 Transformer, 4603
Rectifier, PS-1, PS-SE, and
4612 Power Transfer Device.
HOW TO ORDER 8800 SERIES (LIFE-SAFETY) NARROW STILE RIM EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH DEVICE OPTIONS
MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of
the total exit opening
US FINISH
END CAPS
OPTION
88 01 C M2 -36 -12
88 Life-Safety 00 US Finish
EL Electric Latch Retraction
(indicate 12V/24V)
M Single Switch 30 30 inches US3 Bright Brass
MEC
Matching
End Caps
12 Volts
01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts
02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 40 40 inches
US32 Bright
Stainless
(For EL
Option Only)
03 Black Anodized 335 ED Electric Dogging 48 48 inches
US32D Satin
Stainless
- Without Options
AXXB Alarmed Exit Device
where XX is door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options. ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
ED-16
EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.