Specification Sheet

8400 SERIES (LIFE-SAFETY)
NARROW STILE MORTISE EXIT DEVICE
Thick and Cladded Door Kits
• 91-0995-02* - 2" Thick Door Kit
• 91-0995-03* - 2-1/4" Thick Door Kit
• 91-0995-04* - 2-1/2" Thick Door Kit
• 91-0995-05* - 2-3/4" Thick Door Kit
• 91-0995-06* - 3" Thick Door Kit
• 91-0325-01 – Thermal Door Kit – 1/4" Cladding
• 91-0325-02 – Thermal Door Kit – 1/2" Cladding
*Order 8460-XX Long Lip Strike as required.
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation
for quiet environments such as hospitals, offices, hotels, and libraries
where solenoid-driven devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous
unlocking and locking of the exit device from a remote location or access
control device. LR option is not available on rim type exit devices
(see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify
management of unauthorized exit. Available on minimum opening width
36". Cannot be ordered with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be
used to activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit
devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable
that the end caps match the finish of the exit device. Available for US
finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above
please see the Accessories page of the EXIT DEVICE section of this catalog.
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Mortise Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Thick or Cladded Door Kits, 8360-
17 Extended Lip Strike, 8455-01
Longface, 8460-XX Long Lip Strike.
Adams Rite exit devices are operable by either
rim or mortise cylinders depending upon the
ANSI/BHMA functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 8400 SERIES (LIFE-SAFETY) NARROW STILE MORTISE EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL
FACEPL ATE
FINISH
FACE SHAPE DEVICE OPTIONS
MONITORING
OPTION
BACKSET
DOOR
HANDING
PUSHBAR
FINISH
DOOR OPENING
WIDTH
On pair of doors,
specify HALF of the
total exit opening
US FINISH
END CAPS
OPTION
84 1 4 SE M2 -4 7 1 40
84 Life-Safety 0 US Finish
0 Flat, Radius,
Bevel
LR Electric Latch
Retraction
M Single Switch 2 31/32" 7 RHR 0 US Finish 30 30 inches
US3
Bright Brass
MEC
Matching
End Caps
1 Clear
Anodized 628
4 Radius w/
Weatherstrip
SE Silent Electrification
Latch Retraction
M2 Dual Switch 3 1-1/8" 8 LHR
1 Clear
Anodized 628
36 36 inches
US4
Satin Brass
2 Dark Bronze
Anodized 313
C Cylinder Dogging
(Blank)
No Monitor
4 1-1/2"
2 Dark Bronze
Anodized 313
40 40 inches
US32
Bright Stainless
3 Black
Anodized 335
ED Electric Dogging
3 Black
Anodized 335
48 48 inches
US32D
Satin Stainless
- Without Options
AXXB Alarmed Exit
Device where XX is
door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
ED-8
EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.