Specification Sheet

8200 SERIES (LIFE-SAFETY)
NARROW STILE SURFACE
VERTICAL ROD EXIT DEVICE
Bolts and Strikes
• The patented top latching
mechanism utilizes a rotating top
bolt which deadlatches around
the header strike, interlocking
the door to the frame. Supplied
with standard header strike. The
hexagonal, hardened steel bottom
bolt is shielded in a cast housing
for strength and stability.
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation
for quiet environments such as hospitals, offices, hotels, and libraries
where solenoid-driven devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous
unlocking and locking of the exit device from a remote location or access
control device. LR option is not available on rim type exit devices
(see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify
management of unauthorized exit. Available on minimum opening width
36". Cannot be ordered with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be
used to activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit
devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable
that the end caps match the finish of the exit device. Available for US
Finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above
please see the Accessories page of the EXIT DEVICE section of this catalog.
BOTTOM BOLT
TOP
STRIKE
TOP
BOLT
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Rim Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Tall Door Kit 8055.
Adams Rite exit devices are operable by either rim or
mortise cylinders depending upon the ANSI/BHMA
functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 8200 SERIES (LIFE-SAFETY) NARROW STILE SURFACE VERTICAL ROD EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS
MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of
the total exit opening
US FINISH
END CAPS
OPTION
82 00 - ED M2 -36 -US3
82 Life-Safety 00 US Finish T Top Rod only
LR Electric Latch
Retraction
M Single Switch 30 30 inches US3 Bright Brass
MEC Matching
End Caps
11 Clear Anodized 628 - Standard rod
SE Silent Electrification
Latch Retraction
M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Option 40 40 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option
AXXB Alarmed Exit Device
where XX is door
opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
ED-4
EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.