Specification Sheet

1-1/4"
31.8mm
1-1/4"
31.8mm
6-1/16"
154mm
1/4"
6.4mm
13-1/2" *
342.9mm
11/16"
17.5mm
5/8"
15.9mm
9"
228.6mm
1"
25.4mm
8"
203.2mm
1-29/32"
48.4mm
CYLINDER
HEIGHT
THROW
BOLT PROJECTION
BOTTOM EDGE OF DOOR
EXTENDED
CYLINDER
HOW BACKSET
IS MEASURED:
FLAT
BEVEL
BACKSET
12-24 TAP
(2 PLCS)
*OTHER LENGTHS AVAILABLE ON SPECIAL ORDER
1-1/4"
31.8mm
2-1/8"
54mm
1-1/4"
31.8mm
DIA.
8-1/64"
203.6mm
7-1/4"
184.2mm
1/4"
6.4
mm
1-1/4"
31.8mm
5/8"
15.9mm
13/16"
20.6mm
1-5/8"
41.3mm
3/4"
19.1mm
1/2"
12.7
mm
3/8"
9.5mm
1-17/64"
32.1
mm
DRILL & TAP PLATE
8-32 THREAD
(3 PLCS)
DRILL & TAP
8-32 THREAD
(2 PLCS)
DRILL 3/4" DIA.
CLEARANCE
HOLE IN
DOOR PLATE
BOLT GUIDE
BOLT
NOSE OF
DOOR
DIA
8-32
FLAT HEAD
MACHINE
SCREWS (3)
1"
25.4
mm
1870HM CYLINDER-OPERATED FLUSHBOLT
ARMORED FACEPLATE
1" X 8"
Finish: US28 Satin Aluminum
(628) consult factory
about special finishes.
FLAT 1870HM
LH BEVEL 1872HM-5
RH BEVEL 1872HM-6
For installation locking threshold.
Invert for header locking.
RELATED PRODUCTS
When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Special Order Options
Lock mounting accessories and options. 1870HM Cylinder-Operated Flushbolts are operable by any standard
1-5/32" diameter mortise cylinder with MS
®
cam.
Other cylinder lengths
available as special order.
HOW TO ORDER 1870HM CYLINDER-OPERATED FLUSHBOLT
Specify quantity and the following information. Order related products separately.
Product No. FACEPLATE SHAPE HANDING FINISH
187 0HM 5 -628
0HM Flat 0 Non-Handed* 313 Dark Bronze Anodized
2HM Bevel 5 LH or RHR 335 Black Anodized
6 RH or LHR 628 Clear Anodized
*Any flat or radius faceplate.
Dimensions
Installation
Door Preparation
FP-4
FLUSHBOLTS & PIVOTS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.