Specification Sheet

C
L
C
L
DIA.
L
C
L
C
L
C
L
C
L
C
L
C
CYLINDER
STRIKE
PLATE
LATCH
FACE
*STRIKE and Faceplate of ANSI
dimensions must be positioned
according to ANSI Spec.
HOW BACKSET
IS MEASURED:
29/32"
23mm
5/8"
15.9mm
1-17/64"
32.1mm
1-1/4"
31.8mm
1-3/16"
30.2mm
3/8"*
9.5mm
7/64"
2.8mm
8-1/64"
203.6mm
1-1/4"
31.8mm
1-3/16"
30.2
mm
4-7/8"
123.8mm
3-3/8"
85.7mm
2-1/8"
54mm
1-1/4"
31.8mm
15/16"
23.8mm
1/4"
6.4mm
1-7/16"
36.5mm
8"
203.2mm
7-1/4"
184.2mm
19/32"
15.1mm
3/8"
9.5mm
1/4"
6.4mm
7-11/16"
195mm
5-13/16"
147.6mm
“A”
CYLINDER
STRIKE
LATCH
BACKSET
FLAT
BEVEL
SHOWN RH/LHR.
BOLT IS REVERSIBLE
FOR OPPOSITE HAND.
BACKSET MEASURED
AT CENTERLINE
OF DOOR EDGE
4920AN HEAVY DUTY DEADLATCH (ANSI SIZE)
Dimensions Jamb & Door Preparation
Latch Paddle & Cylinder
Installation
Nominal, subject to tolerance extremes
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Electric Strikes
Lock mounting accessories
and options.
4920AN Heavy Duty Deadlatches (ANSI Size) operable by
any standard 1-5/32" diameter mortise cylinder with MS
®
cam.
Entry trim, paddles, handles
and lever operators.
Application sepecific.
HOW TO ORDER 4920AN HEAVY DUTY DEADLATCH (ANSI SIZE)
Specify quantity and the following information. Order related products separately.
Product No. BACKSET HANDING STRIKE FACEPL ATE FINISH
4920AN 4 6 -602 -313
4 1-1/2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized
5 2-3/4" 6 RH or LHR 602 4506 Strike 335 Black Anodized
628 Clear Anodized
BACKSET “A”
1-1/2"
38.1
mm
2-9/64"
54.4
mm
2-3/4"
69.9
mm
3-25/64"
86.1
mm
ARMORED FACEPLATE
1-1/4" X 8"
FLAT
24-0138-01-XXX
Flat faceplate can be
adjusted for right or left
beveled edge doors.
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Identical to MS1850SN Series
(See also prep for 4591 paddle).
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DA-12
DEADLATCHES