Specification Sheet

1/2"
12.7mm
CVR
INSTALLATION
HOLE
10-32 X 5/16
SCREW
FLAT HEAD
UNDERCUT
(5 PLCS)
STRIKE
PLATE
ASSEMBLY
RIVNUT
(2 PLCS)
ESCUTCHEON
PADDLE
FOR 4781
PIVOT
PIN
SET
SCREW
3/4"
19.1mm
3/4"
19.1
mm
3/4"
19.1mm
1-3/8"
34.9mm
1-5/8"
41.3mm
3/8"
9.5mm
BACKSET
(OUTSIDE ONLY)
OF PADDLE
OF CYLINDER
(2 PLCS)
DRILL BEFORE
1-3/8" DIA. HOLE
DIA.
DIA.
IMPORTANT
1-1/4"
31.8mm
5-1/8"
130.2mm
30"
762mm
1-3/64"
26.6mm
44"
1117.6mm
66"
1676.4mm
1-1/4"
31.8mm
X
MIN I.D.
UP TO
OR
PADDLE
HEIGHT
*Other cylinder escutcheons for use with 17mm profile cylinders (in 44 or 55mm
thick doors only) are also available and require different door prep than shown.
DRILL BOTH SIDES
(FOR #10-32
SCREW & CSK
INTERIOR ONLY)
NOTE: THESE
DIMENSIONS AND
TEMPLATES ASSUME
A DOOR 1-3/4" THICK
WITH 1/8" STILE WALL.
DOORS WITH OTHER
THICKNESS OR
WALL WILL REQUIRE
MODIFICATION
TO THE DEVICE.
SEE TRIM SECTION FOR
COMPLETE DIMENSIONS
OF 4591 PADDLE.
BACKSET FOR
NARROW STILE.
CAN BE INCREASED
FOR MEDIUM OR WIDE.
1/4"
6.4mm
1-3/64"
26.6mm
3/4"
19.1mm
DIA.
INTERIOR
FACE OF
DOOR
INTERIOR
SIDE OF
HEADER
1-1/4"
31.8mm
1"
25.4mm
1"
25.4mm
1"
25.4mm
1"
25.4mm
1-1/2"
38.1
mm
1-3/64"
26.6mm
BACKSET
3"
76.2mm
5/8"
15.9mm
1/4"
6.4mm
3/8"
9.5
mm
1/2"
12.7mm
1/2"
12.7mm
7/8"
22.2mm
DIA.
INSIDE ONLY
INTERIOR
FACE OF
DOOR
1/4"
6.4mm
DIA.
BACKSET
DIA.
(2 PLCS)
INSIDE ONLY
FOR #10-32
SCREWS
(5 PLCS)
4781 TWO-POINT DEADLATCH WITH PADDLE
Dimensions Door Preparation
Door Preparation
WITH 8650 ESCUTCHEON*
Installation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Special Order Options
8650 Cylinder Escutcheon.
8655 Tall Door Kit.
4781 Two-Point Deadlatch is operable by any standard 1-5/32" diameter
mortise cylinder with MS
®
cam.
4036 Mortise Cylinder.
3080 Entry Trim.
HOW TO ORDER 4781 TWO-POINT DEADLATCH Specify quantity and the following information. Order related products separately.
Product no. OPERATION PADDLE FINISH
4781 T -021 -628
T Top rod only 021 Push to LEFT 313 Dark Bronze Anodized US3 Bright Brass
– Standard rod 041 Push to RIGHT 335 Black Anodized US26 Bright Chrome
628 Clear Anodized US26D Satin Chrome
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DA-8
DEADLATCHES