Specification Sheet

1830 Bottom Rail
Deadlock (Swing Bolt)
Operation
360° turn of key or thumbturn throws or retracts the
counterbalanced bolt. Key can be removed only when bolt is
in a positively locked or unlocked position. Lock accepts any
standard 1-5/32" mortise cylinder from either or both sides.
Cylinder must have MS
®
dimensioned cam.
Specifications
CYLINDER HEIGHT (BACKSET)
• 31/32" and 1-1/8" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x
depth (depth varies with cylinder height).
BOLTS
• 15/32" x 5/8" x 2-1/8" with 5/8" throw. Six-ply laminated
steel with eight plys within case. Center ply has alumina-
ceramic core to deter hacksaw attack.
STRIKE
• See back page for dimensions of strike slot which can be
cut in metal thresholds. 4006 strike (shown) is available
separately, with stainless steel trim plate and plastic box.
CYLINDER CAM
• 1830 Bottom Rail Deadlocks are operable by any
standard 1-5/32" diameter mortise cylinder with MS
®
cam,
dimensioned as shown. Cylinders with MS
®
cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and
trim ring information.
OPTIONS
• Specify either 31/32" or 1-1/8" cylinder height (see
dash table). 4006 strike and cylinder(s) available
separately, if required.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns are available separately.
Shipping weight: 1-1/2 lbs.
1830 BOTTOM RAIL DEADLOCK (SWING BOLT)
FULL GLASS
ALUMINUM
GRADE 1
E8211
The 1830 Bottom Rail Deadlock provides bottom rail locking
in ultra-narrow stile or tempered glass doors. Tamper-proof
with an armored faceplate, it protects with a minimum
threshold strike opening.
Function
For bottom rail locking of ultra-narrow stile or tempered glass doors whose
bottom rail (shoe) is too shallow for the MS1861 Bottom Rail Deadbolt (see
DEADLOCKS). Mechanism is that of the MS1850 Deadlock, but with the bolt
size reduced. This keeps the threshold strike opening to a practical minimum,
avoiding collection of debris or snagging on high-heeled shoes. Armor
faceplate protects cylinder setscrews from tampering and keeps them from
loosening. Not applicable to wood doors.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125 – B TR* = A + .132 – B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS
+
1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6
mm
± .127
mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“ TR ” is trim ring length.
“
A ” is cylinder height (less shoulder but including cam).
“
B ” is one-half of door thickness.
4006 STRIKE
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADL OCKS
DL-3