Specification Sheet

Steel Hawk
4300 Electrified
Deadlatch
(eLatch)
Operation
Turn key, apply voltage, or operate handle or paddle to
release the spring-loaded latchbolt. Electrically-rated for
continuous duty for timed applications. Interface with access
control. Uses any standard mortise cylinder with MS
®
cam.
Specifications
CYLINDER BACKSET
• 31/32", 1-1/8", and 1-1/2".
CASE
• Measures 15/16" x 5-13/16" x depth. Depth varies
by backset (see table on back of page). Steel with
corrosion-resistant plating.
LATCHBOLT
• 5/8" x 1" x 5/8" throw. Stainless steel.
AUXILIARY BOLT
• All metal. Deadlocks latchbolt to prevent “loiding” or
case-knife entry.
FACEPLATES
• Measures 1" x 6-7/8". Both flat and radius faceplates are
supplied. Flat faceplates can also be adjusted in the field
for right or left beveled edge doors.
VOLTAGE
• Field-selectable to match power source of 12, 16, or 24
VAC/VDC
CURRENT DRAW/AMPS
VOLTS DC CONTINUOUS
12 0.44
16 0.458*
24 0.23
*Required 16 VDC adapter (P/N VA 7400-16VDC)
STRIKES
• Pick from optional strikes. 4304 no-cut surface mounted
strike for easy retrofits. Specify mortised-flush version 4901
when covering existing MS
®
deadlock preparation or for
new applications. 4901 is available with radius profiles for
pairs of doors and with extended lips of center-hung or thick
door applications doors.
STEEL HAWK
4300 ELECTRIFIED DEADLATCH (ELATCH)
STEEL HAWK
4300 ELECTRIFIED DEADLATCH (ELATCH)
ALUMINUM
ELECTRIFIED
PRODUCT
GRADE 1
E8231
The Steel Hawk 4300 Electrified Deadlatch (eLatch)
combines non-handed, narrow backset, mechanical
locking hardware with electrified access control.
Function
The 4300 eLatch combines mechanical locking hardware with electrified
access control while working within standard aluminum entrance door
preparations. Always operable from the inside via handle or paddle device.
Entry via keyed mortise cylinder or access control element. Fail-secure lock
with optional form “C” latch status monitor. The standard 4300 operates
on 12, 16, or 24 volt DC power and is rated for continuous duty. Units are
equipped with a quick connect plug-in type connector. Interchangeable without
stile modification for MS
®
Deadlocks or 4500 and 4900 Deadlatches. 1-3/4"
minimum door thickness required.
4901 STRIKE
CYLINDER CAM
• 4300 Electrified Deadlatches are operable by any standard
1-5/32" diameter mortise cylinder with MS
®
cam dimensioned
as shown. Cylinders with MS cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• Backset, strike, and finish must be specified when ordering.
Please select monitoring option if request to exit (REX)
is required. If selected, an external request to exit (REX)
feature in exit trim is not required with the 4300 Electrified
Deadlatch.
STANDARD PACKAGE
• Individually boxed with flat and radius faceplates, strike, and
machine screws for mounting. Supplied with universal cam
plug 4581 to work with specified handles or paddle operators.
Cylinder, paddle, or handle available separately. Shipping
weight: 1-1/4lbs.
RITE Pack
®
• The Steel Hawk 4300 RITE Pack conveniently pairs the
non-handed, narrow backset, electrified deadlatch with the
flexibility of multiple faceplates in a single, simple package.
• The RITE Pack includes one electrified deadlatch
and four faceplates.
• 2 flat faceplates: one clear (628) and one dark bronze
anodized finish (313)
• 2 radius faceplates: one clear (628) and one dark bronze
anodized finish (313)
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125 – B TR* = A + .132 – B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS
+
1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“ TR ” is trim ring length.
“
A ” is cylinder height (less shoulder but including cam).
“
B ” is one-half of door thickness.
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DA-1
DEADLATCHES