Specification Sheet

5017 Wood Door
Deadlock/Deadlatch
Operation
45° rotation of turn or key throws or retracts bolt. Bolt is self-
protecting: if door is shut while bolt is extended, it will retract,
preventing damage or accidental lock-out.
Specifications
BACKSET
• 1-3/16" (1-1/4" including faceplate).
CASE
• Stainless steel, measures 1/2" x 4" x 1-19/32" deep. Bolt is
laminated stainless steel (specify 5015 for zinc plated steel
case and faceplate).
FACEPLATE
• Stainless steel, 5/8" x 4-1/2" with radiused ends.
1015 TURN
• Available with 1016 blank plate shown for doors from 5/6"
to 2-1/4" thickness. Without blank plate turn available (for
use with cylinder pull) on doors from 1-7/16" to 2" thickness.
Standard finish 130, Satin Aluminum enamel.
4026 CYLINDER PULL
• Five pin tumbler cylinder in zinc alloy housing. Standard finish
130 Satin Aluminum.
OPTIONS
• Specify 5015 for zinc plated steel case and faceplate. 1015
Turn for inside operation is available alone (for use with 4026
cylinder pull on outside) or with a blank 1016 outside trimplate
and binder posts (when cylinder is not required). 4810 Box
Strike with wood screws available separately.
STANDARD PACKAGE
• Cylinder pulls and/or thumbturns available separately.
Shipping weight: 1/2 lb.
5017 WOOD DOOR DEADLOCK/DEADLATCH
WOOD
GRADE 2
EB292
The 5017 Wood Door Deadlock/Latch provides the strength
and deeper backset required to secure sliding wood doors.
Function
For wood framed sliding doors, the 5017 Wood Door Deadlock/Latch provides
the same thousand pound strength that the MS1847 Deadlock/Latch provides for
metal stiles. A deeper backset clears the recessed jamb used with wood doors.
The bolt throw is easily adjusted by means of a screw in the faceplate. Mounting
is by through-bolts, which also secure the inside turn and outside cylinder when
installed.
4810 BOX
STRIKE
1015
4026
CYLINDER
PULL
1016 PLATE
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADL OCKS
DL-39