Specification Sheet

4070 Series Short
Throw Deadbolt
(Projection Style)
Operation
180° turn of key or thumbturn projects or retracts the bolt.
Accepts any standard 1-5/32" mortise cylinder from either or
both sides. Cylinder must have special cam to fit (as shown).
Specifications
CYLINDER BACKSET
• 7/8", 31/32", or 1-1/8" only.
CASE
• Steel with corrosion-resistant plating. 1" x 6" x depth. Depth
varies by backset.
BOLT
• 5/8" x 1-1/4" x 5/8" throw.
SPECIAL CYLINDER CAM
• 4070 Short Throw Deadbolts are operable by any standard
1-5/32" diameter mortise cylinder with special cam
dimensioned as shown. See CYLINDERS section for cylinder
make, thumbturn and trim ring information.
STRIKE
• In metal installations, a slot in door jamb serves as strike.
Deluxe trim strike 4170 is also available separately for
wood installations.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1/2 lb.
4070 SERIES SHORT THROW DEADBOLT
(PROJECTION STYLE)
ALUMINUM
GRADE 
E8212
The 4070 Short Throw Deadbolt provides security for a
conventionally projected bolt in installations where the long-
throw MS
®
Deadlock cannot be used. The smaller 4070
offers the longest practical throw from a narrow stile.
Function
For installation where the long-throw MS
®
Deadlock cannot be
accommodated, the smaller 4070 offers the longest practical throw for a
conventionally projected bolt from a narrow stile. Operates with one-half key
turn of any standard mortise type cylinder or cylinder type thumbturn. This
product is not designed for use in bottom rail.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125 – B TR* = A + .132 – B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS
+
1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“ TR ” is trim ring length.
“
A ” is cylinder height (less shoulder but including cam).
“
B ” is one-half of door thickness.
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADL OCKS
DL-33